Please click the manufacturer below to view their respective warranty information.

Aluminum Tank & Tank Accessories -- Aluminum Tank Industries -- Bushman USA -- Custom Roto-Molding, Inc

Davey Pumps -- Desert Plastics -- DuraCast -- Enduraplas -- Fill-Rite -- Fol-Da-Tank

Hastings Equity Manufacturing -- Husky Portable -- IMACC -- Mills Equipment Co. -- Newberry Tanks -- Norwesco

Midwest Industrial Tanks -- Onken -- PFS -- Pinnacle Water Tanks -- PolyJohn Enterprises

Quadel Industries -- RDS -- Rhino Tuff Tanks -- Sioux Steel -- Skolnik

Snyder -- Sotera -- Texas Metal Tanks -- Titan Fuel Tanks --Transfer Flow -- Walrus -- Western Global


Aluminum Tank & Tank Accessories

Certificate of Limited Warranty

Effective Date: April 1, 2016

Warranty valid for any fuel tank, fuel system, headache racks purchased from Aluminum Tank & Tank Accessories, Inc (ATTA) on or after above effective date.

Certificate of Limited Warranty

Warranty is only valid with the return of warranty card to Aluminum Tank & Tank Accessories, Inc. within 30 days from the date of purchase by the original purchaser. The 7 year/Unlimited Mile warranty will not be valid without the return of the warranty card. The limited warranty is valid only for the vehicle listed on the warranty card. Valid only in the United States and Canada.

Seven Year/Unlimited Mile Warranty

Aluminum Fuel Tank Warranty:
Aluminum Tank & Tank Accessories Inc. (ATTA, Inc.) auxiliary diesel fuel tanks are covered by a 7 year/ Unlimited mile limited liability warranty, against defects in material and workmanship. Aluminum Tank & Tank Accessories, Inc. fuel system components are covered by a 7 year/ Unlimited mile limited warranty, except for the inline fuel pump and sending unit resistor. The inline fuel pump and sending unit resistor are covered by a 1 year limited warranty per manufacture requirements. ATTA generator tanks and other manufactured products are covered by a 1 year limited warranty.

Aluminum Headache Rack Warranty:
Aluminum Tank & Tank Accessories Inc. (ATTA, Inc.) aluminum contour headache racks are covered by a 7 year/Unlimited mile limited liability warranty, against defects in material and workmanship. The 6" oval LED lights are covered by a 1 year manufacture warranty. The 18" LED spot lights and the 52" LED Light bar, is covered by a 6 month manufacture warranty. Aluminum headache racks are not intended as a safety device.

Powdercoat/Spray-On Bedliner/Vehicle Paint Warranty:
Powdercoat, Spray-on Bedliner, and Vehicle Paint finish are covered by a 1 year limited warranty against defects.

Aluminum Tank & Tank Accessories, Inc. warranty begins when the original purchaser purchases the unit. The original purchaser is the person who will use for his own use. If a part must be replaced, ATTA, Inc. will furnish the replacement part on a "Return and Replace basis" only. ATTA will pay the established warranty labor rates, listed below, once authorization has been established. ATTA will make no payment for parts purchased or repaired in the field without prior written authorization from ATTA. We will not accept any charges greater than our established warranty rates. We reserve the right to examine the tank or part being claimed for warranty upon return to ATTA, with all shipping charges being prepaid to ATTA. If the warranty claim is determined valid, repair or replacement will be made at ATTA discretion. Warranty will not be honored if the tank or the component failure is caused by conditions beyond the control of ATTA such as damage caused by but not limited to:
  • Customer's misuse or negligence
  • Improper installation by the installer
  • Shipment or improper handling
  • Ordering of incorrect product
  • Use of Contaminated fuels or improper fuel additives
  • Road Debris
  • Damage caused by fuel additives or contaminated fuels
Warranty claims will be valid only if completed warranty card has been received prior to claim by Aluminum Tank & Tank Accessories, Inc. Warranty will not be honored if the product or system is altered in any way or if the ATTA manufacturing tag is removed or defaced. Warranty does not cover consequential damages including, but not limited to: loss of use of the warranted product, loss of time, transportation expenses, towing, expenses for travel, lodging, telephone, or fuel charges, loss of damage to personal property or loss of revenue. Warranty cards must be received within 30 days of purchase by end user. It is the end user's responsibility to fill out and send in warranty cards to Aluminum Tank & Tank Accessories, Inc.

Warranty Claim Procedure

If you have any problems with the fuel tank or fuel system, contact your Dealer where it was originally purchased. The Dealer will contact ATTA with any troubleshooting assistance. If a component needs to be replaced, ATTA will give a RGA (Return Goods Authorization) number, authorization and instructions for replacement of the component. ATTA will require Model and Serial number, proof of purchase, VIN#, and date of installation. When replacement item is shipped, a charge will be made for the part unless the part has been received by ATTA. Credit will be considered upon return of faulty item. All defective components must be returned within 30 days of warranty claim and be marked by the RGA number.

Certificate of Conformity

Aluminum Tank & Tank Accessories, Inc. fuel tanks and fuel systems conform to all rules pertaining to non-side mounted fuel tanks and meets all FHWA non-side mounted fuel tanks requirements as stated in sections 393.67.

Fol-Da-Tank

FOL-DA-TANK, LLC provides a limited lifetime warranty for workmanship and material defects on its manufactured products. Send pictures and descriptions of the issue to your FOL-DA-TANK representative for a prompt response.

Mills Equipment Co.

MILLS EQUIPMENT COMPANY TANKS ARE GUARANTEED TO BE FREE FROM DEFECTIVE WORKMANSHIP AND MATERAL FOR A PERIOD OF ONE (1) YEAR. HOWEVER, MILLS EQUIPMENT COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR CONTINGENT EXPENSES RESULTING FROM SUCH DEFECTS. IN NO EVENT SHALL MILLS EQUIPMENT COMPANY BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO PURCHASER'S USE OR INABILITY TO USE THE TANK(S), HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF MILLS EQUIPMENT COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Enduraplas

1. Poly Tank Limited Warranty:

Subject to other terms in this Limited Warranty, Manufacturer warrants to the original end user that Manufacturers' poly tanks will be free from material defects caused during the manufacturing process for a period of 5 years from the Purchase Date provided such warranty solely to the original end user shall be extended to 10 years from the Purchase Date if the original end user registers the Tank with Manufacturer within 30 days of the Purchase Date. To register the Limited Warranty, registration must be completed in accordance with the requirements set forth at enduraplaswarranty.com.

Limited Warranty for Non-Poly Tanks (including sprayers and refueling units):

Subject to other terms in this Limited Warranty, Manufacturer warrants to the original end user that that non-poly tanks, products and other parts manufactured by Manufacturer will be free from material defects caused during the manufacturing process for a period of 1 year from the Purchase Date unless otherwise expressly stated in writing by Manufacturer that an extended warranty applies. However, no warranty is provided with respect to the installation of outside components, unless previously authorized in writing by Manufacturer.

2. Other Warranties Disclaimed and Excluded:

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE LIMITED WARRANTY HEREIN STATED, AND MANUFACTURER EXPRESSLY DISCLAIMS AND EXCLUDES ANY AND ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, INFRINGEMENT, CUSTOM OR USAGE OF TRADE, AND COURSE OF DEALING. NO AGENT, EMPLOYEE OR REPRESENTATIVE OF MANUFACTURER HAS AUTHORITY TO BIND MANUFACTURER TO ANY REPRESENTATION OR WARRANTY EXCEPT AS STATED IN THIS LIMITED WARRANTY.

3. Limitation of Liability under the Limited Warranty

In addition to those warranties disclaimed and excluded in clause 2 above, Manufacturer expressly further limits its warranty and liability under the Limited Warranty as set forth below in this clause.

3.1 The liability of Manufacturer under this Limited Warranty is excluded to the extent that any defect has been caused or contributed to by:
a) any accident, contamination, tampering, willful damage, abuse, modification, improper storage, improper use (including but without limitation the storage of material) or negligent act of, or omission by, any person other than Manufacturer;
b) failure to comply with Installation Instructions or any improper installation of the Goods, including deterioration of the base on which any of the Goods rest or are mounted to;
c) insufficient plumbing as described in Tank Installation Instructions;
d) any hindrance to the natural expansion and contraction of the tank;
e) any damage to the Goods caused by storm, freeze, wash away, landslide, mudslide, lightning, or any other natural phenomenon, vermin or other pests, and any undermining of the base of the Tank through any cause whatsoever;
f) the repositioning of the Goods from their original installation;
g) weathering or degradation of the Goods due to extreme climatic conditions;
h) failures surrounding extra fittings NOT installed by Manufacturer;
g) any staining or discoloration, including from trees or ash fall-out from fires or other causes;
h) a Tank not being placed on a base that is free of any protruding objects of any kind;
i) a Tank being used for any purpose other than the storage of suitable liquids at the ambient temperatures.

3.2 Without limiting the generality of clause 3.1:

a) Manufacturer will not be liable for any personal injury, property damage, shipping costs, indirect or incidental damages, consequential losses, loss of liquids, installation charges, loss of profit or any like claims whatsoever arising from any use of, or incidental to, or repairs to any of the Goods by a party other than Manufacturer;
b) to the extent that any component or material (including, but without limitation the polyethylene) used in the manufacture of any of the Goods is supplied and/or manufactured by a third party, the liability of Manufacturer is limited to Manufacturer's right of redress (if any) against the third-party supplier/manufacturer;
c) Tanks feature a vented lid at the time of manufacture. Any subsequent pressurization of the Tank by removing the vent, sealing the vent, or otherwise will cause this Limited Warranty as to such Tank to be null and void.
d) Manufacturer-produced outside tanks components (e.g., tank fittings, attachments accessorial parts) are covered by the Limited Warranty only if installed by or preauthorized in writing by Manufacturer.

3.3 The liability of Manufacturer under this Limited Warranty is limited to, at Manufacturer's discretion:

a) providing a comparable replacement Good FOB Manufacturer, any shipping or delivery charges are the responsibility of the person or entity filing the warranty claim;
b) providing a credit at an amount calculated on a pro-rated basis at a sum equal to the price paid by the original entity or end user divided by 60 months (5 year warranty) or 120 months (10 year warranty – IF the end user has registered and activated their extended warranty within 30 days of the original purchase date), multiplied by the number of months remaining in the warranty period; or
c) repairing the Good at no cost.

Manufacturer is NOT responsible for removal of the warrantied Good. In the instance that Manufacturer requires the warrantied Good be returned, said Good must be returned at Manufacturer's cost.

4. Claim Submission / Proof of Purchase:

To submit a Limited Warranty claim, contact Manufacturer at: customercare@enduraplas.com. Notification of warranty claims must be made within 14 days of product failure. The original invoice or other similar proof of purchase of the applicable product or part must be provided by original end user to Manufacturer when making a claim under this Limited Warranty. Warranty claims must be received in writing by Manufacturer within the Limited Warranty period. Additional documentation, including but not limited to pictures of the failure and installation, may be requested and is required to complete the warranty claim. If you have questions about this Limited Warranty, contact Manufacturer at: customercare@enduraplas.com.

5. Nontransferable:

The Limited Warranty is given solely to the original end user and is nontransferable.

6. Definitions - For this Limited Warranty the following definitions apply:

a) Good(s) mean Tanks and/or other products, or parts manufactured by Enduraplas LLC.
b) Manufacturer means Enduraplas LLC.
c) Purchase Date means the date upon which the applicable goods were purchased by the original end user.
d) Purchase Price means the actual price paid for the Goods by the original end user purchaser.
e) Tank means the storage Tank manufactured by Manufacturer and purchased by the original end user Purchaser being the subject matter of this Limited Warranty.

7. State Law:

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to certain parties. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to certain parties. This Limited Warranty gives specific legal rights and other rights, which vary from state to state, may also apply.

8. Governing Law:

This Limited Warranty will be governed by the laws of the State of Minnesota, without giving effect to any choice of law rule that would cause the application of the laws of any other jurisdiction. Any disputes regarding matters relating to the Goods will be resolved exclusively in the State of Minnesota and all parties consent to such jurisdiction. RIGHTS TO A JURY TRIAL, CLASS ACTION AND CONSOLIDATED DISPUTE RESOLUTION PROCEEDINGS ARE WAIVED TO THE EXTENT PERMITTED BY LAW.

Quadel Industries

We take pride in manufacturing quality products, at a competitive price and delivering them on time. Occasionally, we experience a product failure in the field. In these instances please contact TankAndBarrel.com support as soon as possible. A report will be filed and resolution determined by management and communicated back to you within 48 hours.

Quadel's standard warranty is one (1) year from the date of purchase to the original purchaser. Any part which proves defective as determined by Quadel personnel within the warranty period of 1 (one) year from the date of purchase will be repaired with a new or rebuilt part. In the event the product proves to be so defective that it precludes reasonable remedy the purchaser's sole remedy will be a refund of the purchase price. No responsibility shall be assumed by Quadel for removal, reinstallation, freight, labor or damages whether they be direct, indirect or incidental. Liability shall not apply to damage resulting from accident, tampering, alteration, design, inability to use, misuse, or abuse. If the product is altered in anyway from its original specifications the warranty is void.

Quadel's Titan Water Tanks adhere to the warranty guidelines listed above with the exception of the time frame which is extended from one (1) year to (3) three years.

Aluminum Tank Industries

Aluminum Tank Industries, Inc. warrants all products to be free of defects in material or workmanship for a period of 1 year from invoice ship date from our warehouse. Severe Series refueling tanks are covered for 5 years. Standard duty tanks are designed for use with transfer pumps up to 30 lbs. Installing a pump over 30 lbs on a standard duty tank will void warranty. A Severe Series tank is required if using a transfer pump over 30 lbs. If upon our inspection we deem the item to be defective, Aluminum Tank Industries, Inc. will determine whether to repair or replace the defective item. It is the customers responsibility to ship the item to Aluminum Tank Industries, Inc. No cost for labor, installation, or missing contents will be reimbursed. Damages due to shipping and handling, improper installation, abuse – intentional or accidental, or normal wear and tear are not covered by this warranty. Warranty is void if the tank has been altered.

PolyJohn Enterprises

POLYJOHN PORTABLE RESTROOMS LIMITED 3 YEAR PRODUCT WARRANTY

PolyJohn Enterprises Corp. warrants the major plastic parts of its portable restrooms (plastic front, wall panels, roof, and tank) against any breakage or other problems that prevent the PolyJohn portable toilet from functioning in accordance with usual practices used in the portable toilet industry and in their intended manner. This warranty covers any damages in material or workmanship for a total period of 3 years (36 months). This warranty extends only to the original purchaser of the PolyJohn portable restroom. Proof of purchase, serial numbers, and photos will be required.

Coverage Period

Coverage under this warranty is for a total of 3 years (36 months) from time of manufacture. A part or repair supplied under this warranty will assume the balance of the original warranty period. During this time period if any major plastic parts covered by the warranty incur damage that prevent it from functioning, PolyJohn will provide replacement parts. Purchaser is responsible for any freight, labor, or other costs associated with replacement.

Filing Process for Warranty

PolyJohn reserves the right to request inspection of products for verification of defect, which may include returning some or all of the parts with shipping paid for by the purchaser. Once the items have been returned, inspected, and PolyJohn is found at fault shipping costs will be reimbursed.

To file your warranty claim follow these steps:
1. Go to polyjohn.com/warranty/
2. Fill out necessary contact information
3. Fill in invoice number, date of purchase, product, and product serial numbers.
4. Upload an images of affected products
5. Submit and someone will be in contact with you as soon as possible.

What is Not Covered By Warranty

This warranty does not cover damage or failure contributed to or caused by: Not following PolyJohn assembly procedures, unauthorized modification, acts of God, mishandling, misuse, use of incompatible solvents or other damaging chemicals, vandalism or accident. In no event shall PolyJohn be liable for labor costs or for incidental or consequential damages.

**THIS WARRANTY IS IN LIEU OF ALL PRIOR WARRANTIES EXPRESSED OR IMPLIED**

POLYJOHN PORTABLE SINKS LIMITED PRODUCT WARRANTY

PolyJohn Enterprises warrants to the Purchaser that the Portable Sink sold to Purchaser is merchantable in quality and fit for the ordinary purpose for which it was intended, free from defects in material and in its manufacture for a period of one year (the "Warranty Period") from the date of purchase. Any misuse or abuse of the Portable Sink or component thereof* or failure to properly follow recommended procedures shall void this warranty. PolyJohn's responsibility with respect to their Portable Sinks or components thereof shall be limited to the foregoing.
1. In the event that the PolyJohn Portable Sink (1 year limited warranty) or component thereof (90 day limited warranty), proves defective in material or workmanship during the Warranty Period, claims regarding the Sink or component thereof shall be made by following the online submission form** stating the nature of the defect and that such claim occurred within the Warranty Period. On verification that the claim is valid, PolyJohn shall replace the Sink, or component thereof, found to be defective. Purchaser will be responsible for any shipping costs incurred.
2. PolyJohn shall in no case be liable for any damage to any property (other than the defect in the Sink, or component thereof, sold by PolyJohn), or for indirect, special, incidental or consequential loss or damage caused to Purchaser, or any customer thereof, even if PolyJohn has been advised of such loss or damage, whether in contract, tort or otherwise. No obligation exists to replace the PolyJohn Portable Sink, or component thereof, should there be evidence that the Sink or component thereof, was subject to improper use, acts of God, handling, storage or assembly by the Purchaser.
3. In the event of any valid warranty claim against PolyJohn, PolyJohn shall not be responsible to Purchaser and will not bear liability for damages, however caused, to persons or property or for the loss of anticipated profits or for any direct, indirect or consequential damages suffered by Purchaser, or any employee or property thereof.

Filing Process for Warranty

PolyJohn reserves the right to request inspection of products for verification of defect, which may include returning some or all of the parts with shipping paid for by the purchaser. Once the items have been returned, inspected, and PolyJohn is found at fault shipping costs will be reimbursed. You may contact PolyJohn to arrange for return shipping if desired.

To file your warranty claim follow these steps:
1. Go to polyjohn.com/warranty/
2. Fill out necessary contact information
3. Fill in invoice number, date of purchase, product, and product serial numbers.
4. Upload an images of affected products
5. Submit and someone will be in contact with you as soon as possible.

THIS WARRANTY IS IN LIEU OF ALL PRIOR WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Husky Portable Containment

Husky Portable Containment (HPC) offers a lifetime warranty on all welds and welded seams in our firefighting product line and a 3-year warranty all welds and welded seams in our environmental product line. All warranty claims may be reviewed and inspected by HPC to determine if the claim will be honored. Pictures of the area in question should be sent to HPC to help determine if a warranty applies. If it can be resolved with a repair kit then HPC will ship (regular ground, within the upper 48 states in the USA, outside of the area or country the end-user is responsible for all shipping charges which must be pre-paid) the repair kit to the end-user for them to apply. If it is determined to be a legitimate warranty issue that cannot be repaired with a repair kit HPC will either replace the product (shipping regular ground, all shipping charges outside the upper 48 states in the USA will need to be pre-paid by the end-user before a replacement product will be shipped) or repair the product at HPC's facility. HPC reserves the right to determine if the product can be repaired. If the product in question is to be returned for warranty repair HPC will pay only the shipping costs back to the end-user (regular ground) within the upper 48 states in the USA. The cost to ship the product to HPC will be the liability of the end-user. Outside of the area or country, the end-user is responsible for all shipping charges which must be pre-paid. HPC reserves the right to refuse any damaged claim due to end user negligence or product abuse. The warranty period will begin at the time the product is delivered to the end-user.

The express warranties set forth above are in lieu of and supersede (i) all other warranties and remedies whether express or implied, oral or statutory, including any warranty of merchantability or fitness for a particular purpose, and (ii) any obligation. Liability, right, claim, or remedy in contract or tort, including without limitation product liability based upon strict liability and negligence. Neither party will be liable to the other for indirect, incidental, special, cover, consequential, or exemplary damages (including but not limited to loss of profits, revenue, or business) resulting from or in any way related to the goods or services purchased/sold hereunder, this order or termination of this order. This limitation applies regardless of whether the damages or other relief sought are based in contract or tort, including breach of contract including warranty, negligence, strict liability in tort, or any other legal or equitable theory.

RDS Manufacturing

RDS warrants all products to be free of defects in material or workmanship for a period of 1 year from invoice ship date from our warehouse. If upon our inspection we deem the item to be defective, RDS will determine whether to repair or replace the defective item. It is the customers responsibility to ship the item to RDS. No cost for labor, installation, or missing contents will be reimbursed. Damages due to shipping and handling, improper installation, abuse – intentional or accidental, or normal wear and tear are not covered by this warranty. Warranty is void if the tank has been altered.

Davey Pumps

1. The guarantee period commences on the date of original purchase of the equipment. Evidence of this date of original purchase must be provided when claiming repairs under guarantee. It is recommended you retain all receipts in a safe place.

2. Davey products are warranted to the original user only to be free of defects in material and workmanship for a period of 36 months from date of installation, but no more than 36 months from date of manufacture. Davey's liability under this warranty shall be limited to repairing or replacing at Davey's option, without charge, FOB Davey's distribution center or authorized service agent. Davey will not be liable for any costs of removal, installation, transport or any other charges that may arise in connection with the warranty claim.

3. This guarantee is subject to due compliance by the original purchaser with all directions and conditions set out in the Installation and Operating Instructions. Failure to comply with these Instructions, damage or breakdown caused by fair wear and tear, negligence, misuse, incorrect installation, inappropriate chemicals or additives in the water, inadequate protection against freezing, rain or other adverse weather conditions, corrosive or abrasive water, lightning or high voltage spikes or through unauthorized persons attempting repairs are not covered under guarantee. The product must only be connected to the voltage shown on the nameplate.

4. Davey shall not be liable for any loss of profits or any consequential, indirect or special loss, damage or injury of any kind whatsoever arising directly or indirectly from the product or any defect, and the purchaser shall indemnify Davey against any claim by any other person whatsoever in respect of any such loss, damage or injury.

5. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. The warranty gives you specific legal rights and you may also have other rights which vary from state to state.

6. This guarantee applies to all states and territories of United States of America and Canada only.

Desert Plastics

LIMITED WARRANTY

For the specific Water Harvesting Products:
Cubo, Villa, Villa Eldorado, Durango, Nino, Companion, and Remote Series Only
Effective January 16, 2015
Desert Plastics, LLC, hereinafter referred to as "DP", warrants to the original purchaser of the product and related parts, except valves, to which this warranty relates, hereinafter referred to as the "Product", that it will, as detailed below, repair or furnish a replacement in the event of a failure, should such failure be determined by DP to have occurred in the course of normal use and service, or, at DP’s option, refund the purchase price of any Product found to be defective in workmanship or material. Such refund, repair, or replacement will be made through the original place of sale, within the applicable periods specified.

WARRANTY: If the Product provided by DP fail within one (1) year of the date of sale, DP will, at its option, repair, replace, or refund the purchase price of any Product found, upon inspection by DP or its authorized agents, to be defective in workmanship or material.

This warranty will not apply to:
  • Defects or malfunctions resulting from failure to properly install, secure, use, or maintain the Product and it’s components in accordance with the printed instructions provided.
  • Failures resulting from abuse, accident or negligence, including, but not limited to, the use of chemicals "generally known" to be harmful to the Product.
  • Products or parts that are not installed in the United States, and in accordance with all applicable local codes, ordinances, and good trade practices.
  • Any filter or strainer.
  • All valves and related components. The manufacturer of the valve warrants them.
  • Any and all damage resulting from freezing temperatures.

CONSEQUENTIAL DAMAGE: DP shall not be responsible for any loss or damage to personal property in or near the Product or other consequential damage to the extent such damages are excluded under applicable state law. No responsibility is assumed for loss of use of the Product or inconvenience therefrom.

SERVICE LABOR RESPONSIBILITY: In making repairs or furnishing replacement, DP assumes no responsibility for any labor expenses for service, removal, or reinstallation. Such costs are the responsibility of the purchaser.

SHIPPING COSTS: Purchaser will be responsible for any cartage, including the cost of returning the replaced Product to the place it was first delivered.

HOW TO MAKE A CLAIM: Any claim under this warranty should be made to the place of purchase. The original receipt must accompany all returned Products.

NOTE: No one is authorized to make any other warranties on DP’s behalf. Any implied warranties, including merchantability or fitness for a particular purpose, shall not, with respect to the Product, extend beyond one (1) year from the date of sale. This warranty is extended to the original purchaser only and is only transferable upon written permission from Desert Plastics. DP makes no other warranty of any kind, expressed or implied, except that the goods sold hereunder shall be of merchantable quality and the buyer assumes all risks and liabilities resulting from the use of the goods and Products, whether used singly or in conjunction with other products.

LIMITED WARRANTY

“Agua Fria 2” Series Rain Barrels
Water Harvesting Tanks Only
Effective January 20, 2010
Desert Plastics, LLC, hereinafter referred to as “DP”, warrants to the original purchaser of the product and related parts, except valves, to which this warranty relates, hereinafter referred to as the “Product”, that it will, as detailed below, repair or furnish a replacement in the event of a failure, should such failure be determined by DP to have occurred in the course of normal use and service, or, at DP’s option, refund the purchase price of any Product found to be defective in workmanship or material. Such refund, repair, or replacement will be made through the original place of sale, within the applicable periods specified.

WARRANTY: If the Product provided by DP fail within three (3) years of the date of sale, DP will, at it’s option, repair, replace, or refund the purchase price of any Product found, upon inspection by DP or it’s authorized agents, to be defective in workmanship or material. It is imperative that a sales receipt from an authorized distributor accompanies all warranty claims.
This warranty will not apply to:
  • Defects or malfunctions resulting from failure to properly install, secure, use, or maintain the Product and it’s components in accordance with the printed instructions provided.
  • Failures resulting from abuse, accident or negligence, including, but not limited to, the use of chemicals “generally known” to be harmful to the Product.
  • Products or parts that are not installed in the United States, and in accordance with all applicable local codes, ordinances, and good trade practices.
  • Products that have non-Desert Plastics supplied parts or workmanship.
  • Freeze damage to any vessel that does not have a Desert Plastics-provided internal overflow.
  • Freeze damage to any vessel that is subjected to conditions outside those as detailed below in Section “Freezing Conditions”.
  • Any filter or strainer.
  • All valves and related components. The manufacturer of the valve warrants them.

FREEZING CONDITIONS: The Agua Fria 2 Series of rain barrels will be warranted against damage from freezing temperatures as long as it is used in an environment where the daytime temperature is above 40 degrees. It is also imperative that all but one of the mechanical fasteners that attach the top to the body are removed to allow for expansion.

CONSEQUENTIAL DAMAGE: DP shall not be responsible for any loss or damage to personal property in or near the Product or other consequential damage to the extent such damages are excluded under applicable state law. No responsibility is assumed for loss of use of the Product or inconvenience therefrom.

SERVICE LABOR RESPONSIBILITY: In making repairs or furnishing replacement, DP assumes no responsibility for any labor expenses for service, removal, or reinstallation. Such costs are the responsibility of the purchaser.

SHIPPING COSTS: Purchaser will be responsible for any cartage, including the cost of returning the replaced Product to the place it was first delivered.

HOW TO MAKE A CLAIM: Any claim under this warranty should be made to the place of purchase. The original receipt must accompany all returned items and Products.

NOTE: No one is authorized to make any other warranties on DP’s behalf. Any implied warranties, including merchantability or fitness for a particular purpose, shall not, with respect to the Product, extend beyond one (1) year from the date of sale. This warranty is extended to the original purchaser only and is only transferable upon written permission from Desert Plastics. DP makes no other warranty of any kind, expressed or implied, except that the goods sold hereunder shall be of merchantable quality and the buyer assumes all risks and liabilities resulting from the use of the goods and Products, whether used singly or in conjunction with other products.

Sioux Steel

Please follow this link to see warranty information.

Skolnik Industries

Skolnik warrants for a period of thirty days (30) from the date of shipment that its products are manufactured and shipped free from substantial defects in materials and workman ship and are in conformance with Certificates of Conformance or Compliance or the like, if any, signed by its authorized representative, provided, however, that the foregoing is subject as to each shipment to variations permitted by the quality level or sampling procedure specified by Buyer or to the quality level or sampling procedure of Skolnik if they are not specified by Buyer. Buyer is to inspect the products and should failure to conform to this warranty be discovered within the warranty period, Skolnik will, if promptly notified, remedy the failure by suitable repair or replacement of the products at its own expense or, at its option, by refund of the portion of the purchase price attributable to products comprising the failure. Products manufactured by others and furnished by Skolnik are limited to the original manufacturer’s warranty, if any, and sold AS IS and all liability of Skolnik due to inadequacies of such products is excluded and disclaimed. All liability of Skolnik due to inadequacies of products which have been damaged, altered, reworked, repaired, modified, or processed after shipment is excluded and disclaimed.

Snyder Industries

LIMITED WARRANTY

Septic tanks and Underground Cisterns

Snyder Industries warrants the septic tanks and underground cistern tanks to be free of defects in material and workmanship for a period of three years from the date of manufacture; five years for the Dominator version. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply. Sole obligation under this warranty is as follows: Snyder Industries shall fulfill this warranty by repairing or exchanging any component part, F.O.B. Factory, that in Snyder Industries judgment shows evidence of defects, provided said component part has been paid for and is returned through an authorized dealer, transportation prepaid. The warrantee must also specify the nature of the defectto the manufacturer. The warranty does not cover treatment systemsthat have been flooded, by external means, or that have been disassembled by unauthorized persons, improperly installed, or subjected to external damage. This warranty applies only to the septic tank or cistern tank and does not include any of the residential wiring, plumbing, drainage, or disposal system. Snyder Industries is not responsible for any delay or damages caused by defective components or material, or loss incurred because of interruption of service, or for any other special or consequential damages or incidental expenses arising from the manufacture, sale, or use of this system. Snyder Industries reserves the right to revise, change, or modify the construction and design of the septic tank or cistern tank or any component part or parts thereof without incurring any obligation to make such changes for modifications in previously sold equipment. Snyder Industries also reserves the right, in making replacements of component parts under warranty, to furnish a component part which, in its judgment, is equivalentto the component part replaced. Under no circumstances will Snyder Industries be responsible to the warrantee for any other direct or consequential damages, including but not limited to lost profits, lost income, labor charges, delays in production, and/or idle production, which result from defects in material and/or workmanship of the septic tank. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Hastings Equity Manufacturing

Hastings Equity Manufacturing offers a 1, 3 or 5 year warranty depending on the product. Please view the item's description for more information.

Titan Fuel Tanks

TITAN FUEL TANKS LIFETIME WARRANTY

I. PRODUCT CATEGORIES

Supertanks, LLC, an Idaho limited liability company, dba Titan Fuel Tanks ("TITAN") sets forth herein its express warranty (this "Warranty") covering the following tank product categories (collectively, "Tank Products"):

A. Polymer body tanks that are specific to a particular vehicle and connect with the vehicle's fuel system, including (1) underbody tanks installed in place of the vehicle's original equipment tanks ("Underbody Tanks"), (2) Spare Tire Auxiliary Systems ("STAFS"), and (3) In-bed auxiliary Tanks ("Auxiliary Tanks")(collectively "Integrated Fuel Tanks");

B. Polymer body transfer tanks such as TITAN's 90 gallon,100 gallon, Trail Trekker, SideKick, UTV/Side by Side (“UTV”) fuel cells (“UTV Tanks”), and other liquid transfer tanks which are carried in a vehicle but not connected to the vehicle's fuel system ("Non-Integrated Fuel Tanks"); and

C. The polymer body TITAN Fuel Caddy designed for non-vehicular use ("Fuel Caddy Tanks").

II. STATEMENT OF LIMITED WARRANTY

Subject to the conditions and limitations of Paragraph III below:

A. Lifetime Warranty. TITAN warrants that the Tank Products set forth in Part I above, and the associated Kynar, nylon or metal fittings and metal strapping and mounting brackets, shall be free from structural failure due to corrosion and defects in workmanship and materials for as long as owned by the Original Purchaser as defined below.

B. Limited Warranty for Electronic Components. Electronic components (such as electronic controllers and associated printed circuit board, resistors, transistors electronic timers, level sensors and solenoid valves) on all Tank Products shall be free from defects in workmanship and materials for a period of six (6) months from the date of purchase.

C. Limited Life Products Warranty. Other components of the Tank Products, including without limitation all serviceable items, and other non-Tank Products (such as in-bed tool boxes, skid plates for UTVs, etc.) shall be free from defects in workmanship and materials for a period of one year from the date of purchase.

III. COVERAGE CONDITIONS, LIMITATIONS AND EXCLUSIONS

A. This warranty shall be in effect only in North America and Australia and is offered only to the original purchaser which has registered this Warranty and provided the information as set forth in Section V below (the "Original Purchaser"), and with respect only to Products purchased from TITAN or its authorized reseller.

B. This Limited Warranty does NOT cover:

1. A claim from any person or entity other than the original Purchaser;

2. A claim with respect to a vehicle specific tank installed in a vehicle other than the year, make, type and model of the vehicle for which the Product was designed by TITAN, or which has been reinstalled in another vehicle;

3. A Product that, in TITAN’s judgment, has been subjected to damage arising from external causes not consistent with normal and customary use of the Product, including without limitation:

(a) improper installation, removal, repair or alteration of the Product;
(b) natural disasters such as earthquake, fire, flood, or storm;
(c) damage to the Products caused by accident or collision involving the vehicle, or from repairs to the vehicle; or
(d) introduction of a fuel, fuel blend, liquid, or chemical into the Integrated Tanks, Non-Integrated Tanks, or Fuel Caddy Tanks other than as specified by TITAN.

C. Except for the above express warranty, TITAN MAKES NO OTHER WARRANTY RELATING TO THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In particular, TITAN shall not be liable for any consequential or incidental damages or claims alleged to have been caused by failure of the Products. In no event shall the Purchaser recover damages exceeding the amount of the purchase price of the Products.

D. Original Purchaser agrees that this Warranty shall be construed in accordance with the laws of the State of Idaho, USA, without reference to its choice of law principles. The state or federal courts located in Bonneville County, Idaho shall have exclusive jurisdiction to resolve any dispute relating to this Warranty.

IV. REMEDY FOR FAILURE OF WARRANTY

The Purchaser's remedy shall be limited to (a) repair of the Product, (b) replacement of the Product and related parts, or (c) refund of the Purchase Price of the Product, at TITAN’s sole option. The repaired or replaced Product shall be warranted for the remainder of the original Warranty Periods set forth above. Shipping costs, if any, shall be paid by the Purchaser.

V. HOW TO CLAIM THE WARRANTY

A. Within 60 days of purchase, provide proof of purchase of the Product and register the warranty with TITAN. You may do this online at www.titanfueltanks.com/warranty or by filling out and sending to TITAN the above Warranty Registration Form.

B. Send the Warranty Form and proof of purchase, together with an explanation of the problem with the Product, to TITAN by mail, fax or email addressed as follows:

TITAN FUEL TANKS
P.O. Box 2225
Idaho Falls, ID 83403
Telephone: (800) 728-4982
Fax: (208) 529-2162
Email: sales@titanfueltanks.com

C. TITAN will likely require an inspection of the Product by TITAN's field representatives or require you to take the Product to an authorized dealer or installer in your area. TITAN may also require photographs of the Product to be sent or emailed in order to evaluate warranty coverage.

D. As soon as possible after TITAN has received the requested materials, TITAN will notify the Original Purchaser whether the alleged defect is covered by this Warranty, and if covered, the remedy to be provided.

Custom Roto-Molding, Inc.

Tanks manufactured by Custom Roto-Molding, Inc. are warranted against defects in material and workmanship for a period of Five (5) Years from date of original purchase. Custom Roto-Molding tanks conforms to ASTM D-1998 specification. Warranty online applies to Tanks that have been correctly installed and have not been subject to abuse or misuse. These warranties are made for the benefit of the original end user.

1. It is the reponsibility of the end user to perform initial cleaning, testing for leaks and the suitability of the storage tank to a specific application. Verify chemical compatibility in accordance with chemical resistant chart provided by resin manufacturer.

2. All external plumbing must have secondary support and must not apply excessive load on the tank outlets. Please provide flexible connections between tank and rigid plumbing installations. Lifting lugs are to be used only when tank is empty.

3. Refer to OSHA confined space entry procedures prior to cleaning any tank.

4. Warranty does not cover misuse, fire, accident, negligence, transit damage, unauthorized modifications to the product, excessive external pressure or abnormal use.

5. Warranty does not cover loss of product through leakage or damages for injuries persons or property caused by leakage.

6. Tanks and fittings have not been cleaned or pretested for leaks. Fill with water and clean before using. Rinse well and check compatibility before use.

7. Liability of the manufacturer under this warranty and any other warranty, expressed or implied, statutory or otherwise, is limited to repair or, at the Manufacturer's option, replacement of the defective product which is shown to have been defective when shipped, and only then if the Manufacturer is notified in writing of the defects within the warranty period and items in question are promptly delivered to it's point of manufacture. Transportation charges are to be prepaid.

8. Inspect product for any damages incurred during shipping and handling to tank and fittings upon receipt.

9. Vertical flat bottom tanks must be installed on a stationary, flat level, solid surface.

Rhino Tuff Tanks

Rhino Tuff Tanks offers a limited lifetime warranty on all of their products.

Rhino Tuff Tanks (RTT) stands behind all of our quality products and we will repair or replace at our discretion, any product found to be defective due to a manufacturing defect. The manufacturers warranty does not apply to any products that have been subjected to an accident, adjustment, improper installation, misapplication, misuse, modification, neglect, repair, including but not limited to improper maintenance, or use of unauthorized parts or attachments.

Texas Metal Tanks

All Texas Metal Tanks in galvanized steel come with a 1-year warranty. All stainless steel tanks come with a 5-year warranty.

IMACC Corporation

Tanks refurbished by IMACC Corporation are guaranteed not to leak or contaminate your product.

Bushman USA

Bushman Water Harvesting Corporation (dba Bushman USA) Limited Warranty BUSHMAN WATER HARVESTING CORPORATION (dba Bushman USA) (Seller) warrants its water storage tanks sold in the United States against defects in materials or workmanship for three (3) years from the date of purchase. The Limited Warranty is dependent upon installation in accordance with Seller's specifications and the use of Seller's components, accessories and designated application practices exclusively. If a defect is discovered in normal use of a tank in the manner intended, Seller will, at its sole election, repair or replace the tank. In no event will Seller's responsibility exceed the purchase price of the tank received by Seller. Additional requirements or terms of this Limited Warranty are:

1. The Limited Warranty extends to the original purchaser only and is not transferable by operation of law or otherwise.

2. The Limited Warranty is limited to the repair or replacement of the tank, at the sole discretion of Seller. Seller is not liable for any damage to property or any other associated costs that may occur when repair or replacement of the tank is carried out. Repair work is undertaken at ground level, so tanks that are located on stands must be brought down to ground level before Seller can commence repair work.

Note that expenses such as landscaping, plumbing, electrical, costs of lifting equipment and hire of additional labor are at purchaser's expense. Bringing tanks down from stands for repair work is also at the purchaser's expense.

3. The Limited Warranty does not apply to the tank color, which may in time fade or change.

4. The Limited Warranty applies to the one piece polyethylene structure of the tank and does not extend to fittings such as the strainer, outlet, valve, tap, overflow or any other fittings, accessories or ancillary components. Some fittings, accessories and ancillary components are covered under a separate limited warranty program, which is available upon request.

5. The Limited Warranty on water tanks is for the storage of water only, at a water temperature not exceeding 73F/23C. The Limited Warranty does not apply to tank damage due to freezing.

6. The Limited Warranty on water tanks is for storage of water on the site only. Transporting water in water tanks voids the Limited Warranty.

7. The Limited Warranty is void and will not be binding upon Seller in the event of damage to unsecured tanks through blowing away, or by abuse, improper installation, unsound base, or unauthorized modifications to the tank.

Note that all installation instructions must be followed and in particular the fitting of flexible hoses.

8. Seller must be notified of any defect or fault (using a Seller-approved claim form) within seven (7) days of it occurring. Seller must be given the opportunity to inspect the tank within thirty (30) days of such notification, otherwise the Limited Warranty is void.

9. THIS LIMITED WARRANTY IS THE EXCLUSIVE WARRANTY PROVIDED BY SELLER AND IS IN LIEU OF, AND SELLER DISCLAIMS, ALL OTHER WARRANTIES, EXPRESS AND IMPLIED, INCLUDING, WITHOUT LIMITATION, (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, (II) ANY IMPLIED WARRANTY ARISING FROM COURSE OF PERFORMANCE, COURSE OF DEALING OR USAGE OF TRADE, (III) ANY OTHER OBLIGATIONS OR LIABILITIES WHATSOEVER, WHETHER IN CONTRACT, WARRANTY OR TORT, OR BY STATUTE OR OTHERWISE FOR ANY NONCONFORMANCE, DEFECT, DEFICIENCY, FAILURE, MALFUNCTION OR FAILURE TO PERFORM, (IV) STRICT LIABILITY OR PRODUCT LIABILITY, AND (V) ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL AND INCIDENTAL DAMAGES OF ANY NATURE WHATSOEVER.

DuraCast

Tank Holding Corp and its custom molding divisions warrants to the original purchaser of rotomolded plastic custom products a guarantee of performance for a period of ninety (90) days from the date of shipment from the manufacturing site produced from customer provided tooling and will repair or furnish a replacement of the rotomolded plastic custom product, at its discretion, in the event of a failure that is found by Tank Holding Corp to have been a result of a defect in manufacturing material or workmanship. Replacement parts will be provided F.O.B. the original manufacturing site. All other parts and components associated with the rotomolded plastic custom product that are not manufactured by Tank Holding Corp are only warranted by their respective manufacturer through the terms and conditions of their stated warranty. With respect to products designed by Tank Holding Corp engineers where tooling is purchased from and put into production by a Tank Holding division, the warranty period will be one year from the date of manufacture. Tank Holding explicitly assumes no responsibility, liability, or obligation for any costs associated with removal or re-installation of a defective product or consequential damages as a result of the product failure.

This warranty will not apply to defects or malfunctions resulting from, but not limited to, failure to properly install, secure, use, or failures from abuse, accident, or negligence. Tank Holding shall not be held responsible for any loss or damage to personal property in, or next to, the failed unit, or any other consequential damage to the extent such damages are excluded under state law. No responsibility is assumed for loss of use of the product or the inconvenience caused thereof.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY SHALL BE LIMITED TO THE WARRANTY PERIOD OUTLINED ABOVE. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. TANK HOLDING SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER IN CONTRACT, TORT OR OTHERWISE.

A notice of failure must be made to the custom molding division that produced the product in a timely manner before any warranty coverage will be authorized.

Walrus

Limited Warranty

Products manufactured by Walrus Pumps Co (Walrus) are warranted to the first user only to be free of defects in material and workmanship for a period of 12 months from date of installation, but no more than 24 months from date of shipment. Walrus' liability under this warranty shall be limited to repairing or replacing at our election, without charge, FOB Walrus' distribution center or authorized service agent. Walrus will not be liable for any cost of removal, installation, transportation or any other charges that may arise in connection with warranty claim. The warranty period commences on the date of original purchase of the equipment. Proof of purchase and installation date, failure date, and supporting installation data must be provided when claiming repairs under warranty. This warranty is subject to due compliance by the original purchaser with all directions and conditions set out in the installation and operating instructions. Failure to comply with these instructions, damage or breakdown caused by fair wear and tear, negligence, misuse, incorrect installation, inappropriate chemicals or additives in the water, inadequate protection against freezing, rain or other adverse weather conditions, corrosive or abrasive water, lightning or high voltage spikes or through unauthorized persons attempting repairs are not covered under warranty. Walrus will not be liable for any incidental or consequential damages, losses, or expenses, arising from installation, use, or any other causes. There are no express or implied warranties, including merchantability or fitness for a particular purpose, which extend beyond those warranties described or referred to above. Certain states do not permit the exclusion or limitation of incidental or consequential damages or the placing of limitations on the duration of an implied warranty, therefore, the limitations or exclusions herein may not apply. This warranty sets forth specific legal rights and obligations, however, additional rights may exist, which may vary from state to state.

Fill-Rite

PDF  Fill-Rite LIMITED WARRANTY POLICY

Pinnacle Water Tanks

If your tank was INSTALLED or the installation was SUPERVISED by Pinnacle Water Tanks employee, Pinnacle warrants each new water tank manufactured to be free from defects in material or workmanship for TWENTY YEARS from the date of initial by original purchaser. If such a defect is found by the Pinnacle Water Tanks to exist within the twenty year period, the Pinnacle Water Tanks will, at its option, (a) repair or replace such product free of charge, F.O.B. the factory of manufacture, or (b) refund to the original purchaser the original purchase price, in lieu of such repair or replacement. The duration of the warranty will run from the date of purchase from a dealer or distributor authorized by Pinnacle Water Tanks (the “warranty period”)

If you tank was NOT INSTALLED by Pinnacle Water Tanks, Pinnacle warrants each new water tank manufactured to be free from defects in material or workmanship for ONE YEAR from the date of initial by original purchaser. If such a defect is found by the Pinnacle Water Tanks to exist within the one year period, the Pinnacle Water Tanks will, at its option, (a) repair or replace such product free of charge, F.O.B. the factory of manufacture, or (b) refund to the original purchaser the original purchase price, in lieu of such repair or replacement. The duration of the warranty will run from the date of purchase from a dealer or distributor authorized by Pinnacle Water Tanks (the “warranty period”).

EXCLUSIVE REMEDY-REPLACEMENT:
Within the warranty period, Pinnacle Water Tanks will replace the goods and/or original manufactured components thereof which are found, to manufacturer satisfaction, to be defective. Pinnacle Water Tanks is not responsible for direct, indirect, special, consequential, or any other damages of any kind, including personal injury to any individual, howsoever caused, including caused by transportation of the goods for repair or replacement.

PROCEDURE FOR OBTAINING SERVICE:
In event of a warranty claim, the purchaser must complete any and all information required by Pinnacle Water Tanks in order to properly assess or investigate the claim. Pinnacle Water Tanks will not be responsible for the removal of any goods found to be defective, or transportation charges to and from Pinnacle Water Tank authorized distributor or dealer, or for installation of any replacement goods and/or parts furnished under the warranty.

LIMITATION OF IMPLIED WARRANTIES AND OTHER REMEDIES:
To the extent allowed by law, neither Pinnacle Water Tanks nor its dealers, nor any company affiliated with Pinnacle Water Tanks makes any implied or other warranties, representations, or promises as to the quality, performance, or freedom from defect of any product covered by this warranty.

PINNACLE WATER TANKS HEREBY DISCMAIMS, TO THE EXTENT APPLICABLE, ANY AND ALL IMPLIED WARRANTIES OF MERCHANT ABILITY AND FIRNESS FOR A PARTICULAR PURPOSE. PURCHASERS ONLY REMEDIES IN CONNECTION WITH THE WARRANTY ARE THOSE SET FORTH IN THIS WARRANTY. IN NO EVENT, WILL PINNACLE WATER TANKS, OR ITS DEALERS, OR ANY COMPANY AFFILIATED WITH PINNACLE WATER TANK BE LIABLE FOR INCIDENT, CONSEQUENTIAL OR PUNITIVE DAMAGES. Some jurisdictions do not allow waivers of certain warranties, so the above waivers may not apply to you. In the event, any implied warranties are limited in duration to ninety (90) days from delivery of the products. You may also have other rights which vary from jurisdiction to jurisdiction.

LIMITATION AS TO THE SCOPE OF THE WARRANTY:
The warranty does not extend to defects or damage caused, in whole, or in part, by:
1. Use of a kind and/or to degree not reasonable to be made of the goods;
2. Improper storage of the goods both prior to and after purchase;
3. Damage caused by, or in the course of installation or assembly;
4. Any use of good of which is not an intended use as specified in manufacturer published product literature, or otherwise specified by manufacturer in writing;
5. Any equipment attached to or used in conjunction with the goods that is not Pinnacle Water Tanks product nor supplied by Pinnacle Water Tanks;
6. Any field modifications, or substitutions, to the original water tank system components;
7. Acidic environmental condition affecting the structural strength or integrity of the goods;
8. Any other circumstances not in keeping with proper maintenance and/or use of the goods;
9. Acts of god, accidents, abuse or neglect of the goods by the purchaser and/or any other individual or entity;
10. Cosmetic changes such as white rust and scratches.

EXCLUSIVE WARRANTY:
This warrant is the only warranty provided by Pinnacle Water Tanks and all other warranties and/or commitments whether expressed or implied and no matter by whom made, statutory or otherwise, are subsumed and replaced by it and are of no legal effects. If any of warranty is held by a court of competent jurisdiction to be void or unenforceable, in whole or in part, such provisions shall be deemed severable and will not affect or impair the legal validity of any other provision of the warranty.

Midwest Industrial Tanks

Midwest Industrial Tanks warrants all products to be free of manufacturing defects in material or workmanship for a period of 1 year from invoice ship date from our warehouse. If upon our inspection we deem the item to be defective, Midwest Industrial Tanks will determine whether to repair or replace the defective item. It is the customers responsibility to ship the item to Midwest Industrial Tanks. No cost for labor, installation, or missing contents will be reimbursed. Damages due to shipping and handling, improper installation, abuse - intentional or accidental, or normal wear and tear are not covered by this warranty. Warranty is void if the tank has been altered.

Onken Tanks

Onken warrants all products to be free of manufacturing defects in material or workmanship for a period of 1 year from invoice ship date from our warehouse. If upon our inspection we deem the item to be defective, Onken will determine whether to repair or replace the defective item. It is the customers responsibility to ship the item to Onken. No cost for labor, installation, or missing contents will be reimbursed. Damages due to shipping and handling, improper installation, abuse - intentional or accidental, or normal wear and tear are not covered by this warranty. Warranty is void if the tank has been altered.

PFS

Manufacturer warrants that if this part is proven to be defective in material or workmanship within one (1) year from the date of sale, manufacturer will replace or repair said part. This standard limited warranty does not apply to damages resulting from misuse, improper application of recommended materials, accident, or improper installation or maintenance. Remedy to the buyer is limited to the replacement of any defective product (or its component where applicable), F.O.B. point of manufacture. The remedy provided under this warranty is limited to the cost of the product(s) and specifically excludes any other direct or indirect consequential damages which result from defects in material and/or workmanship of product(s).

Norwesco

Norwesco Warranty Details:

Failure to comply with the points below voids warranty.
A. Tanks are not fire-resistant. Do not store them near an open flame or heat in excess of 180 F.
B. Do not install any tank under the path of vehicles or heavy equipment.
C. Do not leave Low Profile septic tanks empty for extended periods of time.
D. Low Profile septic tanks and cisterns are designed only for use as underground tanks.
E. Low Profile septic tanks and Low Profile cisterns may be used as holding tanks or for pumping applications where permitted by local codes.
F. Low Profile natural colored cisterns are made of resins that meet FDA specifications for the storage of drinking water and can be used for that application.
G. Protect the tank from sharp objects which could puncture it and cause leakage.
H. Where saturated soil or seasonal high water tables are indicated between the bottom of the tank and the ground surface, see separate Supplemental Installation Instructions on our website.
I. For installations requiring counter-buoyancy measures; please refer to Counter-Buoyancy Instruction on our website.
J. Maximum temperature of liquid entering tank is 120 F.
K. Maximum bulkhead fitting size is 4". It is not advised to use this plastic underground tank for any application other than typical household sewage. Such uses would void product warranty.

WARRANTY

Manufacturer warrants that if this part is proven to be defective in material or workmanship within three (3) years from the date of manufacture, manufacturer will (at company's option) either replace or repair said part. This standard limited warranty does not apply to damages resulting from misuse, improper application of recommended materials, accident, or improper installation or maintenance. Remedy to the buyer is limited to the replacement of any defective product (or its component where applicable), F.O.B. point of manufacture. The buyer's remedy under this warranty does not include any other direct or indirect consequential damages which result from defects in material and/or workmanship of its products.

Newberry Tanks

LIMITATION OF WARRANTY. NO WARRANTY OR GUARANTEE, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY AS TO MERCHANTABILITY OR FITNESS FOR ANY PURPOSE, IS MADE UNLESS THE SAME IS EXPRESSLY SET FORTH HEREIN. NEWBERRY TANKS ARE GUARANTEED TO BE FREE FROM DEFECTIVE WORKMANSHIP AND MATERAL FOR A PERIOD OF ONE (1) YEAR. HOWEVER, NEWBERRY WILL NOT BE LIABLE FOR ANY DAMAGES OR CONTINGENT EXPENSES RESULTING FROM SUCH DEFECTS. NEWBERRY’S ONLY OBLIGATION IS FOR REPAIR OR REPLACEMENT WHICH IS FURTHER LIMITED AS EXPRESSED HEREIN AS TO COST. NEWBERRY TANKS ARE NOT GUARANTEED AGAINST CORROSION. IN NO EVENT SHALL NEWBERRY BE LIABLE FOR PERSONAL INJURY, OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR ANY OTHER COMMERCIAL DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO PURCHASER’S USE OR INABILITY TO USE THE TANK(S), HOWEVER CAUSED, REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT OR OTHERWISE) AND EVEN IF NEWBERRY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL NEWBERRY'S LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE TANK(S).

TANK(S) IN THIS AGREEMENT ARE DESIGNED FOR ATMOSPHERIC PRESSURE. PROPER VENTING REQUIRED. NOT DESIGNED FOR OVER THE ROAD USE. BUYER ASSUMES ALL LIABILITY FOR ALTERNATIONS, ADDITIONS OR MODIFICATION IT REQUIRES NEWBERRY TO MAKE TO INDUSTRY STANDARD DESIGNS AND PRODUCTS.

Sotera

PDF  Sotera LIMITED WARRANTY POLICY

Transfer Flow

Transfer Flow fuel systems and parts are covered by a six-year unlimited mile warranty against defects in material and workmanship throughout the U.S. and Canada from the unit purchase date by the original purchaser for the original vehicle the unit was installed in.

Warranty will not apply when product failure is caused by conditions beyond the control of Transfer Flow, such as:
  • Malfunction due to incorrectly ordered product
  • Damage from misuse, negligence, or failure to provide reasonable and necessary maintenance
  • Damage caused by improper installation
  • Damaged caused in shipment or improper handling
  • Damage caused by contaminated fuels or fuel additives
  • Product modification or alteration
  • Products made from pickled and oil material are not covered under warranty for corrosion
Any action against Transfer Flow for breach of the warranty must be commenced within one (1) year after the cause of action has accrued.

Any action against Transfer Flow for breach of the warranty must be commenced in the Superior Court of Butte County, State of California.

For specific information regarding part exceptions, exclusions and limitations, warranty claim procedures, and federal regulatory provisions, please read our full warranty details below.

Certificate Of Limited Warranty

1. Six Year/Unlimited Mile Warranty
TRANSFER FLOW, INC. (“TFI”) fuel systems and parts are - EXCEPT AS NOTED IN PARAGRAPHS 2, 3, AND 4 BELOW - covered by a six year unlimited mile warranty against defects in material and workmanship. This warranty is in effect in the United States and Canada from the date the unit is purchased by the Original Purchaser ("Original Purchaser" shall mean the person who purchases for his own use).

2. Specific Parts Warranty
Specific parts purchased from TFI are warranted against defects in material and workmanship as follows:
  • Sending units are covered by a two year warranty from the date of purchase by the Original Purchaser for the Original Vehicle.
  • 12-volt refueling pumps are covered by a two year warranty from the date of purchase by the Original Purchaser for the Original Vehicle (AND ARE NOT TO BE USED FOR AVIATION FUEL).
  • 6 PSI pumps are covered by a two year warranty from the date of purchase by the Original Purchaser for the Original Vehicle.
  • Fuel gauges are covered by a two year warranty from the date of purchase by the Original Purchaser for the Original Vehicle.
3. Exclusions And Limitations
THE TFI WARRANTY, DESCRIBED IN PARAGRAPHS 1 AND 2 ABOVE, IS SUBJECT TO THE FOLLOWING EXCLUSIONS AND LIMITATIONS:
  • The rights of the Original Purchaser under the TFI warranty are LIMITED to return of the goods and repair or replacement of nonconforming goods.
  • THIS WARRANTY DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO: LOSS OF USE OF THE WARRANTED PRODUCT, LOSS OF TIME, INCONVENIENCE, TRANSPORTATION EXPENSES, TOWING, EXPENSES FOR TRAVEL, LODGING, TELEPHONE AND GASOLINE, LOSS OR DAMAGE TO PERSONAL PROPERTY OR LOSS OF REVENUE. NOTE: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
  • Warranties will only cover products on which the identification label is affixed; if the label has been removed or defaced, the warranty is no longer valid.
  • TFI fuel systems are compatible with a maximum 20% concentration of biodiesel fuel manufactured ASTM D7467 specifications. Concentrations above 20% or failing to comply with ASTM D7467 specifications will void warranty.
  • THE WARRANTY PROVIDED IN PARAGRAPHS 1 AND 2 ABOVE IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES (EXPRESS, IMPLIED, OR OTHERWISE) INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN THE EVENT IMPLIED WARRANTIES MAY NOT BE EXCLUDED, THE TERM OF ANY IMPLIED WARRANTY SHALL NOT EXCEED THE TERM OF THE APPLICABLE EXPRESS WARRANTY PROVIDED IN PARAGRAPHS 1 AND 2 ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
  • The warranty will not apply when product failure is caused by conditions beyond the control of TFI, such as:
    • Malfunction due to incorrectly ordered product
    • Damage from misuse, negligence, or failure to provide reasonable and necessary maintenance
    • Damage caused by improper installation or not following installation instructions.
    • Damaged caused in shipment or improper handling
    • Damage caused by contaminated fuels or fuel additives
    • Product modification or alteration
  • Products made from pickled and oil material are not covered under warranty for corrosion.
  • The in-line fuel filter provided with the TFI fuel system is not covered by warranty as it is a standard maintenance item.
  • Any action against TFI for breach of the warranty must be commenced within one (1) year after the cause of action has accrued.
  • Any action against TFI for breach of the warranty must be commenced in the Superior Court of Butte County, State of California.
4. Warranty Claim Procedures
  • If you have difficulty with your fuel system, consult the dealer where the unit was originally purchased. Your dealer will then contact TFI and request assistance. TFI will require model, part and serial numbers, proof of purchase, and date of installation. TFI reserves the right to examine the claimed defect in the field or upon return of the tank or component to TFI’s facility with all shipping charges being prepaid. If a part is defective and must be replaced, TFI will provide a Returned Merchandise Authorization (“RMA”) number, authorization, and instructions for replacement or further handling.
  • No payment will be made for parts purchased or repaired in the field without prior authorization by TFI.
  • TFI will pay its established warranty labor rates to service points or service dealers who have service agreements with TFI.
  • If an item is shipped as a replacement for a defective part, a charge will be made for this part. Credit will be considered upon return of the defective item. ALL RETURNED ITEMS MUST BE IDENTIFIED WITH THE RMA NUMBER AND RETURNED WITHIN 30 DAYS OF OPENING THE CLAIM.
5. Federal Regulatory Provisions
This warranty gives you specific legal rights, and you may also have other rights which vary from State to State, and in accordance with specific federal regulations. TFI does not authorize any person to create for TFI any other obligation or liability in connection with TFI fuel systems. If TFI fails to successfully perform its obligation under this warranty, the Original Purchaser has available the remedies provided by the Magnuson-Moss Warranty Act (P.L. 93-637) and any applicable state law.

Western Global

At Western Global, we are committed to quality and reliability. We know that, as a customer, you need peace-of-mind when working with our products. Our tanks and equipment are durable and built to last. The below sets out the warranty we offer on our products.

1. What's covered
1.1 Subject to the terms of this Policy, Western Global warrants that the goods sold by Western Global (the "Goods") will correspond with their specification at the time of delivery and will be free from material defects in material and workmanship for the following periods (the "Warranty"):
(a) in the case of Steel Tanks (being Western Global steel storage tanks manufactured for the storage and transportation (if applicable) of fuel and/or other industrial liquids), 8 years from the date of delivery; and
(b) in the case of all other products, parts and accessories, 1 year from the date of delivery.

1.2 Any replacement and/or exchange parts provided by Western Global or repairs undertaken by Western Global to the Goods (or any part thereof) will be warranted for the remainder of the original warranty or for a period of ninety (90) days, whichever is greater.

2. What's not covered
2.1 The following will NOT be covered by the Warranty:
(a) costs of normal maintenance;
(b) defects arising from neglect, misuse or unauthorised modifications;
(c) damage caused by abuse, misuse, dropping or other similar damage caused by or as a result off a failure to follow transportation, storage, loading or operation instructions;
(d) damage caused by user negligence;
(e) lack of proper maintenance of the Goods including, without limitation, lack of lubrication, protection and/or maintenance under the supervision of suitably qualified persons;
(f) alterations, additions or repairs carried out by persons other than Western Global personnel;
(g) transportation or shipment costs to and from Western Global, for repair or assessment against a warranty claim, on any Goods (or part thereof);
(h) any consumable items (including (but not limited to) fluids, filters, fuses, bulbs and/or any other consumable item or normal wearing item);
(i) materials and/or labour costs to renew, repair or replace components due to fair wear and tear; and
(j) faults arising from the use of non‐standard or additional parts, or any consequential damage or wear caused by the fitting or use of such parts.

3. Making a warranty claim
3.1 All claims must be made within thirty (30) days from the date on which the buyer becomes aware or should have become aware of any damage or defect with the Goods. If Western Global do not receive notice of a warranty claim within the above timeframe then Western Global will have no obligations under the warranty in respect of that issue.
3.2 If you need to make a warranty claim please download and complete the Warranty Application which can be found at https://western-global.com/warranty/. Once complete the Warranty Application (along with proof of purchase) should be sent to your Western Global sales representative or e-mail info@western-global.com.
3.3 Following receipt of a valid and accepted Warranty Application, Western Global will use its reasonable endeavours to inspect and/or repair and/or replace and/or refund the relevant Goods (or part thereof) within a reasonable time period. Unless agreed by Western Global in writing, if you arrange for a third party to carry out any repairs or work on the Goods (or part thereof) then Western Global will have no liability under the Warranty.
3.4 If you have any queries in relation to the Warranty please contact your Western Global sales representative or e-mail info@western- global.com.

4. Other terms
4.1 The benefit of this Warranty shall be exclusively for the buyer and shall not be in any way be relied upon by any third parties.
4.2 The Warranty is the only Warranty given by Western Global in relation to the Goods. All other warranties (express or implied) are excluded to the maximum extent permitted by law.
4.3 Western Global shall not (in any circumstances) be liable whether in contract, tort or other legal theory, for any loss of profit, loss of goodwill, loss of business, loss of business opportunity, loss of anticipated saving, loss or corruption of data or information and/or any special, indirect or consequential damage suffered by the buyer.
4.4 If a warranty claim is accepted, Western Global may choose to repair, replace or refund the Goods (or any part thereof) at its sole discretion.
INC 5000 Awards!
Inc 5000 Awards
TankAndBarrel.com has been awarded a ranking with the INC 5000 - 4 years in a row - as one of the fastest growing private companies in America!