1 1/2 Inch T-Adapter (Filler Neck Adapter). These are typically used with Ford (1999-Current), Chevy/GMC (2011-Current), Dodge (1999-2012). This T-Adapter will also include the pictured roll-over valve.…
2 Inch T-Adapter (Filler Neck Adapter). These are typically used with Chevy/GMC trucks (1999-2010). This T-Adapter will also include the pictured roll-over valve.…
1 3/4 Inch T-Adapter (Filler Neck Adapter). These are typically used with 2013-Current Dodge trucks. This T-Adapter will also include the pictured roll-over valve.…
This is the Attwood Integrated Fuel Demand Valve, Part #99IFDV00-1. The integrated fuel demand valve, used in conjunction with integrated fuel systems, is for below-deck use, eliminates pressurized fuel from reaching fuel distribution lines…
This is the RDS Marine Tank Fuel Demand Valve with a 3/8 inch fuel line hose barb. This is a replacement fuel demand valve. You will need to remove the bottom barb from your old…
This is the RDS 2" to 3/8" Adapter Assembly (Includes Pickup Tube & Anti-Siphon Valve). This is an adapter for those using gas trucks and need to pull gasoline from the top of the…
This is the RDS Marine Tank Fuel Demand Valve with a 1/2 inch fuel line hose barb. This is a replacement fuel demand valve. You will need to remove the bottom barb from your old…
This is the locking cap assembly for the 2 inch bung location on a RDS transfer/refueling tank. This would only be used if you are NOT using a tank mounted pump! This assembly…