TankAndBarrel.com Security

Poly-Mart Leaf Eater Advanced Rain Head - 2\" x 3\" Rectangle 1Poly-Mart Leaf Eater Advanced Rain Head - 2\" x 3\" Rectangle 2
Lead Time:  3 days
Ships From: Texas


Ask a question about this product

Quantity   


The Leaf Eater Advanced Rain Head (2" x 3" Rectangle Model) is the next generation Rain Head, featuring the new patented Clean Shield (single screen) technology and VH Pivot outlet. The Leaf Eater Advanced Rain Head is available for 2" x 3" Rectangle downpipes and prevents debris from entering the Rain Harvesting system, which improves water quality and reduces tank maintenance. The single screen incorporates Clean Shield technology which deflects leaves and debris away from the flow of water. This minimizes maintenance and enhances catchment efficiency. This Rain Head incorporates a VH Pivot outlet that swivels to suit vertical or horizontal downpipes. The Leaf Eater Advanced can also be used as a debris removing device even when rainwater is not being collected.

Ships FREE with purchase of any Poly-Mart tank!!

Features and Benefits
  • Compact, versatile rain head for quick and easy installation
  • Patented single screen technology for advanced debris shedding (Clean Shield)
  • Minimal maintenance
  • Pivot the outlet to suit vertical or horizontal (rear outlet) downpipes - variety of installation options in one product (VH Pivot)
  • High flow rate performance
  • Superior catchment efficiency at low and high flow rates
  • Single screen with 0.955mm aperture mosquito proof stainless steel mesh
  • Available in 90mm or 100mm outlet
Model: RHAD90
Manufacturer: Poly-MartPoly-Mart
Gutter and Mid-Mount Installation

1. Gutter: Measure 10 1/2" from the bottom of the existing gutter pop and remove this section of downspout. Ensure the cut edge is clean and smooth. Mid-Mount: Remove 10 1/2" of downspout where the Leaf Eater Advanced is to be situated. Ensure all cut edges are clean and smooth. (figure 1)

2. Using the quick release tabs remove the Clean Shield screen by lifting it up and then out. (figure 2)

3. Insert the Leaf Eater Advanced by sliding it up over the cut section and then down into position. The Leaf Eater Advanced outlet should be slid firmly onto the bottom down pipe until it can be pushed no further. (figure 3)

4. Screw the Leaf Eater Advanced into position through the screw slots provided. Ensure appropriate screws and anchors (if required) are used. (figure 5)

5. Insert the Clean Shield screen into the Leaf Eater Advanced. Ensure the Clean Shield screen is sitting firmly in place and check installation is secure. (figure 6)

Leaf Eater Advanced

Horizontal (Rear Outlet) Installation

1. Using the quick release tabs remove the Clean Shield screen by lifting it up and then out. (Figure 2)

2. Swivel the outlet to the horizontal position - some force may be required.

3. Position the Leaf Eater Advanced next to existing pipework, mark and cut top and bottom cut lines as per figure 4. Ensure the cut edge is clean and smooth.

4. Insert the Leaf Eater Advanced by sliding the rear outlet into the horizontal pipe. The back fixing plate must sit behind the top section of downspout. (figure 3)

5. Screw the Leaf Eater Advanced into position through the screw slots provided. Ensure appropriate screws and anchors (if required) are used. (figure 5)

6. Insert the Clean Shield screen into the Leaf Eater Advanced. Ensure the Clean Shield screen is sitting firmly in place and check installation is secure. (figure 6)

Poly-Mart Warranty Details:

Poly-Mart carries a 1-year warranty on all accessories and specifically excludes the cost of labor for installation and/or removal of personal property. We are also not liable for personal/property damages. Poly-Mart is not liable for accessory failure if damaged by the customer.

Manufacturers
Categories