Lead Time: 2-3 Weeks
Ships From: Oklahoma
Manufacturer: Husky Portable Containment
This is the Husky Eagle Series Foam Wall Berm - 10' x 25' x 3". Contain minor drips and small capacity tanks with Husky Low Profile Foam Berms! Husky foam wall berms are designed for long life and less maintenance. They are very simple to use and set up is minimal. There are cutouts on the bottom side of the berm in the corners and every 5 feet around the perimeter to accept the foam inserts. Foam inserts are 3" diameter by 5 feet long and are manually slid into the cutout pockets. Once inserted your berm is ready for use. There are separate storage bags for the berm and foam inserts.
- Drive in / drive out without risking damage to foam walls
- Tread pads available (Optional)
- Can be manufactured to meet any size specifications or requirements
- Optional full enclosed or removable foam walls
- Ground covers available (Optional)
- Material Options: PVCs from 22 oz. - 30 oz., all XR materials, urethanes
- Standard wall size is 3", taller sizes available up to 12"
- High quality foam end walls can be driven over repeatedly with no damage
- Maneuvering straps in corners and every 10 feet
- Storage bags
Husky Warranty Details:
Husky Portable Containment (HPC) will warranty all welds and welded seams on most products for a Lifetime (10 years for bladder tanks). All warranty claims may be reviewed and inspected by HPC to determine if the claim will be honored. Pictures should
be sent to to help determine warranty. If it is a repair that can be done by a repair kit then HPC will ship (regular ground) (within the upper 48 states in the USA, outside of the area or country the
end user is responsible for all shipping charges which must be pre-paid) a repair kit to the end user for them to apply. HPC reserves the right to refuse any damaged claim due to end user negligence or product abuse. If it is determined to be a legitimate warranty issue HPC that cannot be repaired with a patch kit HPC will either replace the product (shipping regular ground) (all shipping charges outside the upper 48 states in the USA will need to be pre-paid by the end user before a replacement product will be shipped) completely with new or repair the product at HPC facility. HPC reserves the right to determine if the product can be repaired. If the product in question is to be returned for warranty repair HPC will pay only the return shipping costs (regular ground) within the upper 48 states in the USA, outside of the area or country the end user is responsible for all shipping charges which must be pre-paid. The cost to ship the product back to HPC will be the liability of the end user. The warranty period will begin at the time the product is delivered to the end user.